HHS<SUP>®</SUP> Clean adhesive lubricant pre-cleaner - PRECLNR-(HHS CLEAN)-500ML

HHS<SUP>®</SUP> Clean adhesive lubricant pre-cleaner - PRECLNR-(HHS CLEAN)-500ML - 1

HHS<SUP>®</SUP> Clean adhesive lubricant pre-cleaner - PRECLNR-(HHS CLEAN)-500ML - 2

HHS<SUP>®</SUP> Clean adhesive lubricant pre-cleaner - PRECLNR-(HHS CLEAN)-500ML - 3

HHS^® Clean adhesive lubricant pre-cleaner

Name: HHS ® Clean adhesive lubricant pre-cleaner
Brand: Würth
SKU: 089310610

Adhesive lubricant, pre-cleaner, HHS Clean
PRECLNR-(HHS CLEAN)-500ML
HHS

Art.-no. 089310610

EAN 4045727105092

All versions

Prices for customers after login

HHS^® Clean adhesive lubricant pre-cleaner

Art.-no. 089310610

Prices for customers after login

Quantity

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 0800116633

Highly effective pre-cleaner + adhesion promoter (primer function) specifically matched to HHS products

Good cleaning performance

Quick and effective

Easily removes the most stubborn soiling

Primer function

Improves adhesion of lubricant

Extends lubrication intervals

Saves time and money

Short flash-off time

Short downtimes for treated parts

No second application required

Good material compatibility with various surfaces

Extremely wide application range

Seals do not swell

Spray head with direct jet

Targeted and precise cleaning of dirty parts

Acetone-free, AOX-free and silicone-free

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Highly effective pre-cleaner and bond improver (primer) specially tailored to HHS products.

Instructions

Spraying dirt with HHS Clean directly or in specific areas will remove the dirt without further treatment.

Contents	500 ml
Oil basis	Mineral oil
Colour	Colourless, Clear
Smell/fragrance	Characteristic
Density	0.76 g/cm³
Density conditions	at 20°C
pH value	8
Min. processing temperature	5 °C
Max. processing temperature	40 °C
Silicone-free	Yes
Acetone-free	Yes
AOX-free	Yes
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.