1C foam gun PURlogic® Xpress For professional application of 1-component gun foams
1C foam gun, PURLOGIC Xpress
FMGUN-1C-(PURLOGIC-XPRESS)-PLA
Register now and access more than 6,000 products
Optimised sealing system
A seal combination means it is no longer necessary to readjust the needle seal
- Low tare weight for easy and effortless handling
- Ergonomic grip is secure in your hand
- Foam dispensing quantity can be adjusted variably for a clean spraying pattern
- Easy to clean as foam accumulations are reduced thanks to the nano coating on the needle and cone
A polyurethane foam can should always be screwed onto the PURLOGIC
® guns. The gun should be cleaned with PURLOGIC® Clean at regular intervals. Please refer to the instructions for use. Can be used for all Würth single-component gun foams. When used with other polyurethane foam cans, the function should be tested beforehand
Datasheets(X)
The gun is used to apply 1-component polyurethane foam. All commercially available gun foams in aerosol spray cans with standard screw-on adapter are suitable. Being able to precisely adjust the PU foam quantity means that the gun is suitable for controlled dispensing and customised filling of joints, thereby enabling precise and secure installation.
Check that the gun is suitable and works before use. Shake the foam can vigorously and remove the cap. Screw the gun onto the upright can. To ensure that no foam escapes from the side of the adapter, do not hesitate when working (if necessary, remove with PU foam clean, art. no. 0892 160). Lightly press the trigger to fill the gun with foam. The gun is now ready to use.
Material | Plastic |
Colour | Red |
Product weight (per item) | 427.000 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Soft wax
Injectable mortar WIT-PE 500 WIT-PE 500 for concrete and post-installed rebar connection
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
Hexagon nut assortment
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Plus Quadro-L Vario hammer drill bit
Twist drill bits HSS DIN 338 type RN TIN head
Screw rivet with cross-shaped slit, open
Plasterboard plug W-GS Type ZD made from die-cast zinc