Adhesive lubricant HHS® 2000 Set of 6 pieces
Adhesive lubricant HHS 2000 promo box set 6 pcs
CHEM-SET-(HHS2000)-500ML-PROMOBOX
HHS
Register now and access more than 6,000 products
- It eliminates creaking and squeaking noises, has excellent creepage and penetrating properties and offers good corrosion protection.
- Very good adhesive lubricant, does not shear off turning and rotating parts
- Compatible with O-rings/X-rings and plastics. Neutral behaviour on painted substrates.
- Resistant to spray water and salt water, weak acids and alkalis
- Free from silicone, resin and acids
Resistant to high pressure loads, the HHS 2000 lubricating film remains active and does not strip off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart body from the basic body and thus ensures optimum wear protection at higher pressure loads.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Extremely high-pressure-resistant partly synthetic oil for universal lubrication and for high pressure loads
Carefully and thoroughly pre-clean lubrication points before each application with HHS Clean art. 089310610. Shake the can before use, spray the parts and let it take effect briefly.
After use, spray the spray head upside down until empty.
Number of pieces in assortment/set | 6 PCS |
Last viewed
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Flat blunt-ended file DIN 7261, shape A
Conical countersink assortment Yellow/blue ring HSS 90° DIN 335 C 6 pieces
Crimp cable lug, round connector PVC-insulated
Rain jacket START UP
Medium-strength flange sealant
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Rosette Brass, MS 63 F 30, black oxide