Aluminium extension ladder 2 pieces
2-part alu. exten. ladder + traverse EN 131
EXTLDR-2PCS-ALU-TRAV-2X12RUNGS
Register now and access more than 6,000 products
- Easy extension and retraction
- Robust guide fittings with plain bearings made from abrasion-resistant plastic provide secure, torsion-resistant support for the ladder parts
- High torsional rigidity thanks to quadruple flanged and pressed connections between struts and rungs
- Rungs and spar made of extruded aluminium for very good bending resistance
- Secure footing thanks to non-slip 2-component ladder feet/cross rail shoes
- Grooved rungs ensure safe stepping
- Increased stability and tilt resistance thanks to the cross rail
- The sliding part can be used on both sides due to ladder feet at both ends and rungs grooved on both sides (type 2x8, type 2x10)
The traverse (including fastening material) is included with the ladder and can be fitted in just a few easy steps.
Datasheets(X)
Material | Aluminium |
Surface | Plain |
Number of rungs | 2 x 12 |
Min./max. length | 3.55-6.09 m |
Width | 0.43 m |
Traverse length | 1.05 m |
Traverse dimensions | 64 x 25 mm |
Rail dimensions | 73 mm x 25 mm |
Rung distance | 283 mm |
Rung dimensions | 28 x 28 mm |
Stand area according to TRBS 2121-2 | No |
Max. dock height (at 70° tilting) | 5.75 m |
Load capacity | 150 kg |
Max. stand height | 4.46 m |
Max. working height | 5.96 m |
Max. reaching height | 6.46 m |
Weight | 14.2 kg |
Standards | EN 131 |
Last viewed
O-ring, imperial NBR 70
Hand tap, second tap HSS DIN 352
Pressure sprayer Solvent-resistant
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
MFD-S multi-purpose drill bit with straight shank
T-handle, TX with side tip
Flat brush
Tungsten carbide bur with MX teeth
Oscillating jigsaw STP 150 Power-B With bow handle, ideal for working under tough construction site conditions
Tungsten carbide bur with MX teeth