Car shampoo 3 in 1
Car shampoo 3in1
CLNR-VEH-(3-IN-1)-1LTR
Register now and access more than 6,000 products
Car shampoo combines three properties in one formula and ensures that road dirt is effectively lifted and gently removed.
- The firm and dense foam with a pleasantly fresh odour effortlessly removes heavy dirt from paint, chrome, glass, plastic, tyres, rims and convertible tops
- During cleaning, a protective polymer layer is applied to all treated surfaces, which protects the vehicle and also allows the water film to run off automatically after rinsing with clean water
- Coats the paint with a permanent protective film and leaves no stains or water marks, thus considerably reducing the time required to wipe the vehicle dry with a chamois
Do not use on hot surfaces in direct sunlight. Protect from frost.
For all washable, smooth surfaces such as car paint, chrome, rubber, vinyl, plastic, etc.
Rinse off coarse dirt with clean water. Mix 50 to 100 ml (3 to 4 caps) with 10 litres of warm water and wash the vehicle as usual using a sponge or a washing mitt. Finally, rinse the vehicle down using clean water. Wipe off any residual water using a soft microfibre cloth or chamois.
The car shampoo 3in1 can also be used with the foam gun at a dilution of 1:5 and 1:10. The product can also be applied using the pressure sprayer bottle.
Contents | 1000 ml |
Product weight (per item) | 1049.333 g |
Container | Bottle |
Chemical basis | Surfactans |
Colour | Blue |
Density/conditions | 1.007 g/cm³ / at 23°C |
Mixing ratio | 01:10 - 01:20 |
Min./max. processing temperature | 15 to 60 °C |
Shelf life from production/conditions | 24 Month / at 5°C to 35°C |
AOX-free | Yes |
Phosphate-free | Yes |
Würth Catalogue (1)
Datasheets (1)
Certificates/ Documents (0)
Last viewed
Diagnostics module WTI 300
Combi hexagon tapping screw with captive washer
Lamella flap disc stainless steel
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Adhesive lubricant HHS 2000® PLUS
Steel garage jack with dual pump 2.5 T
Breaker bar ½”
Sealing ring, aluminium, shape A
Mounting board for hose clamp set
Lock washer DIN 127, steel, mechanically applied zinc coating
