Circlip pliers, shape A for shaft circlips
DIN 5254 shape A shaft circlip
CRCLIPPLRS-A-(10-25MM)
Register now and access more than 6,000 products
Standard: DIN 5254
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings.
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Internal spring
- Inside screwed joint for protection
- Does not obstruct work
- Cannot be soiled or lost
Datasheets(X)
Circlip pliers for outer rings (shafts).
 | |
Length (L1) | 140 mm |
Min./max. grip range | 10-25 mm |
Jaws length (L2) | 38 mm |
Material | Steel |
Diameter of tenon (D1) | 1.25 mm |
Form | A |
Last viewed
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Angular joint shape CS with retaining clip, left-hand thread DIN 71802, steel, zinc-plated, blue passivated (A2K)
Diesel Cure
RW® bit
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
PU COMPRESSED-AIR HOSE
ASSY®plus 4 CSMP universal screw Hardened zinc-plated steel, partial thread, countersunk milling pocket head
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive