Clamping mandrel For cutting discs and grinding discs
Clamping mandrel for cutting and grinding disc
MNDRL-CUTDISC-D10-(0-8MM)-SHFT6MM
ZEBRA
Register now and access more than 6,000 products
Clamping range from 0–8 mm
Just one clamping mandrel for all clamping ranges.
Clamping screw is completely countersunk in clamping mandrel
No protruding thread sections, enabling work even in cramped spaces.
Clamping screw with large contact surface and right-hand thread (self-clamping effect)
Reliable holding of wheels.
Clamping screw with large support surface and lengthwise slit
Easy to loosen or tighten with a 17 mm open-ended spanner or slotted screwdriver.
Datasheets(X)
Suitable for bore diameter | 10 mm |
Length | 58 mm |
Shank diameter | 6 mm |
Last viewed
Twist drill bits HSS DIN 338 type RN TIN head
Low-strength hydraulic sealant
1/2 inch impact socket wrench insert hexagon, metric, short
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
High-vis vest with zipper and ID pocket
Hand tap, third tap HSS DIN 352
Soft wax
C 6.3 PH bit (1/4 inch)
1/2-inch impact socket wrench assortment 12 pieces
Bond + Seal structural adhesive