Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-4X20
Register now and access more than 6,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4 mm |
Length (l1) | 20 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
CUT+COOL drilling and cutting oil
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
Tar remover
Angular joint shape CS with retaining clip, left-hand thread DIN 71802, steel, zinc-plated, blue passivated (A2K)
Multi-fibre structural adhesive reinforced with fibreglass
Gluing clamp
W-10 split cowhide leather glove
Rosette Brass, MS 63 F 30, black oxide
Sheet metal nut, type 6 With threaded shank - for challenging connections
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled