Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-4X30
Register now and access more than 6,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4 mm |
Length (l1) | 30 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Angular joint shape CS with retaining clip, left-hand thread DIN 71802, steel, zinc-plated, blue passivated (A2K)
Chemical injection mortar Concrete Multi WIT-UH 300
Hose clamp A4 with asymmetrical lock made entirely of stainless steel
Circlip pliers, shape B for shaft circlips
Pipe and fastening clamp Multifix
Blind rivet with soft claws and flat head
Hand tap set HSS, DIN 352 3 pieces
Screw rivet with slit, open
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
DUO-S impact drill bit with straight shank