Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-5X60
Register now and access more than 6,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 60 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Voltage protective glove For working voltages up to 1,000 V/AC
Hammer drill bit Plus Duo-S Vario
Flat connector contact MCP 2.8
Plus Quadro-L Vario hammer drill bit
Hexagonal bolt, with thread to head and fine thread DIN 961, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)
Straight plug connector For commercial vehicles
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Metric combination wrench with POWERDRIV®
Cordless sabre saw AFS 12 COMPACT M-CUBE
Wire end ferrule without plastic sleeve