Welcome to Würth South Africa For trade customers only
Concrete screw with hexagon head W-BS/S - ANC-(W-BS/S)-(A2K)-WS17-10-45-12X110 - 4
Concrete screw with hexagon head W-BS/S - ANC-(W-BS/S)-(A2K)-WS17-10-45-12X110 - 1
Concrete screw with hexagon head W-BS/S - ANC-(W-BS/S)-(A2K)-WS17-10-45-12X110 - 2

Concrete screw with hexagon head W-BS/S

Concrete screw W-BS steel zinc plated type S
ANC-(W-BS/S)-(A2K)-WS17-10-45-12X110

Art.-no. 5929122045
EAN 4046777685145
All versions

Prices for customers after login
Concrete screw with hexagon head W-BS/S

Art.-no. 5929122045

Prices for customers after login
Quantity
PU
x 25 pcs

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 6,000 products

Highest loads and efficient installation. Ideal for fastening metal structures, zinc-plated steel
  • For anchorage in concrete and masonry

  • Extremely flexible application thanks to up to three effective anchorage depths (size 6-14)

  • Fastening can be adjusted up to two times after installation (size 6-14), for example in order to align railings or anchor plates (please refer to the installation instructions)

  • Very high loads

  • Very low spacing and edge distances thanks to very low expansion effect

  • Very fast and easy installation and immediate load-bearing capacity
Proof of Performance

European Technical Assessment ETA-16/0043 for individual fixing point, option 1, cracked and uncracked concrete:


  • Static and quasi-static action (dia. 6-14)

  • Seismic action, performance category C1 (dia. 6-14) and C2 (dia. 8-14)

  • Fire resistance R30, R60, R90, R120


European Technical Assessment ETA-23/0196 for anchorage in masonry


  • Static and quasi-static action (dia. 5-10)

  • Fire resistance R30, R60, R90, R120 (dia. 5-6)


European Technical Assessment ETA-16/0128 for anchors in a redundant non-structural system:


  • Cracked and uncracked concrete, (dia. 5 and dia. 6)

  • Hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)

  • Fire resistance R30, R60, R90, R120


DIBt National technical approval/general type approval Z-21.8-2090 for temporary anchorage in concrete (dia. 10-14, type S hexagon head)


  • In reinforced and non-reinforced and cracked and uncracked concrete C20/25 to C50/60

  • Use in fresh concrete

  • Multiple use


DIBt National technical approval/general type approval Z-21.1-2075 as bonded screw anchor for anchorage in concrete (dia. 10-14, type S hexagon head)


  • Use in combination with WIT-BS injectable mortar as WIT-BS bonded screw anchor

  • In reinforced and non-reinforced and cracked and uncracked concrete C20/25 to C50/60


Tensile capacity in hollow-core concrete ceilings, (dia. 6-10) - expert report no. 21641 - 2016



Fire resistance rating when exposed to fire according to the standard temperature time curve in masonry (Mz, KSL, KS) and reinforced concrete, (dia. 5 and dia. 6) - expert report no. 2101/173/18 - 2018

Notice

From size 8, we recommend the use of a suitable tangential impact driver for installation. The recommended maximum nominal torque must be observed.


When used in masonry, the stone-specific installation data according to ETA-23/0196 must be observed.

Application area

Steel supports

Brackets

Adjustment - subsequent aligning possible.

Create the drill hole

Clean the drill hole

Place screw

Screw in the screw

Considered installed when the head is close fitting

Screw out the screw max. 2x each by max. 10 mm. Underlay. Screw in

Considered installed when the head is close fitting. Lining max. 10 mm. The required embedment depth must be maintained as a minimum

Locate the tensioning strand

Mark the tensioning strand and locate the next one

Mark the tensioning strands. Specify the drilling range

Create the drill hole. Observe spacing

Clean the drill hole

Screw in the screw

Considered installed when the head is close fitting. Observe the embedment depth/mirror thickness

European Technical Assessment ETA-16/0043 for individual fixing point, option 1, cracked and uncracked concrete:


  • Static and quasi-static action (dia. 6-14)

  • Seismic action, performance category C1 (dia. 6-14) and C2 (dia. 8-14)

  • Fire resistance R30, R60, R90, R120


European Technical Assessment ETA-23/0196 for anchorage in masonry


  • Static and quasi-static action (dia. 5-10)

  • Fire resistance R30, R60, R90, R120 (dia. 5-6)


European Technical Assessment ETA-16/0128 for anchors in a redundant non-structural system:


  • Cracked and uncracked concrete, (dia. 5 and dia. 6)

  • Hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)

  • Fire resistance R30, R60, R90, R120


DIBt National technical approval/general type approval Z-21.8-2090 for temporary anchorage in concrete (dia. 10-14, type S hexagon head)


  • In reinforced and non-reinforced and cracked and uncracked concrete C20/25 to C50/60

  • Use in fresh concrete

  • Multiple use


DIBt National technical approval/general type approval Z-21.1-2075 as bonded screw anchor for anchorage in concrete (dia. 10-14, type S hexagon head)


  • Use in combination with WIT-BS injectable mortar as WIT-BS bonded screw anchor

  • In reinforced and non-reinforced and cracked and uncracked concrete C20/25 to C50/60


Tensile capacity in hollow-core concrete ceilings, (dia. 6-10) - expert report no. 21641 - 2016



Fire resistance rating when exposed to fire according to the standard temperature time curve in masonry (Mz, KSL, KS) and reinforced concrete, (dia. 5 and dia. 6) - expert report no. 2101/173/18 - 2018

Application area

Anchorages in concrete, individual fixing point with approval (dia. 6-14):


In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete)



Anchors in a redundant non-structural system in concrete, with approval:


  • In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete), (dia. 5 and dia. 6)

  • In hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)


Anchorages in masonry with approval (dia. 5-10):


  • In solid calcium silicate block and perforated block

  • In solid block masonry brick


Suitable for fastening medium to heavy loads in concrete and light to medium loads in masonry:


  • Fastening of e.g. metal structures, metal profiles, brackets, base plates, supports, cable trays, pipes, railings, construction site equipment etc. in in-place installation

  • Fastenings subject to seismic activity in earthquake-prone areas (only concrete)

  • Fastenings subject to exposure to fire


W-BS/S (galvanised steel) may only be used in dry indoor room conditions



Temporary fastening of construction site equipment may be carried out indoors and outdoors



For use in concrete < C20/25 and pressure-resistant natural stone (without approval)

Anchor size

12 mm

Anchor length (l)

110 mm

Attachment height (t fix 1)

45 mm

Attachment height (t fix 2)

25 mm

Attachment height (t fix 3)

10 mm

Thread diameter

14 mm

Nominal drill-bit diameter (d 0)

12.0 mm

Drill hole depth (h 1.1)

75 mm

Drill hole depth (h 1.2)

95 mm

Drill hole depth (h 1.3)

110 mm

Embedding depth (h nom1)

65 mm

Embedding depth (h nom2)

85 mm

Embedding depth (h nom3)

100 mm

External drive

WS17

Material

Steel

Surface

Zinc plated

Washer diameter

23 mm

Through-hole in the component to be connected (d f)

16.0 mm

Head type

Hexagon head

Type description

W-BS type S

Installation parameters in pre-loaded hollow ceiling panels
Anchor size [mm] 6
Minimum axis distance smin [mm] 100
Minimum edge distance cmin [mm] 100
Minimum spacing between the groups of anchors amin [mm] 100
Spacing between cavity axes lc ≥ [mm] 100
Spacing between tensioning strands lp ≥ [mm] 100
Spacing between tensioning strands and drilled hole ap ≥ [mm] 50
Nominal drill ∅ d0 [mm] 6
Through hole in the component being connected df ≤ [mm] 8
Installation parameters in concrete
Anchor size [mm] 5 6 8 10 12 14
Nominal length of thread engagement hnom [mm] 351) 351) 40 55 45 55 65 55 75 85 65 85 100 75 100 115
Minimum axis distance smin [mm] 35 35 40 40 50 50 50 70 50 70
Axis distance scr,N [mm] 81 81 93 132 105 129 156 129 180 204 150 201 240 174 237 276
Minimum edge distance cmin [mm] 35 35 40 40 50 50 50 70 50 70
Edge distance ccr,N [mm] 40,5 40,5 46,5 66 52,5 64,5 78 64,5 90 102 75 100,5 120 87 118,5 138
Minimum member thickness hmin [mm] 80 80 80 80 90 102 80 101 120 87 119 138
Nominal drill ∅ d0 [mm] 5 6 8 10 12 14
∅ of cutting edges dcut ≤ [mm] 5,40 6,40 8,45 10,45 12,50 14,50
Drill hole depth h1 ≥ [mm] 40 40 45 60 55 65 75 65 85 95 75 95 110 85 110 125
Through hole in the component being connected df ≤ [mm] 7 8 12 14 16 18
Width across flats [mm] AF10 AF13 AF13 AF15 AF17 AF21
Washer diameter dw [mm] 12,5 15 16 20 23 28
Screw-head height hn [mm] 5 6 9 10 10 12,5
Max. rated torque of tangential impact screwdriver Timp,max [Nm] 110 160 300 400 650 650
1) For anchors in a redundant non-structural system according to ETA-16/0128
General installation parameters in masonry:
Anchor size Diameter 5 6 8 10
Nominal length of thread engagement hnom hnom1 hnom1 hnom2 hnom1 hnom2 hnom1 hnom2
[mm] 35 35 55 45 65 55 75
Nominal drill diameter d0 [mm] 5 6 8 10
Diameter of cutting edges dcut ≤ [mm] 5,4 6,4 8,45 10,45
Drill hole depth h0 ≥ [mm] 55 55 75 65 85 75 95
Through hole in the fixture df ≤ [mm] 7 8 12 14
Performance data of an individual anchor in solid and perforated block masonry according to ETA-23/0196
Anchor size Nominal length of thread engagement Admissible tensile load Admissible shear load Min. edge distance Min. spacing Distance from joints Max. torque for manual installation Max. torque for installation with drill/driver Installation using tangential impact driver
hnom Nadm Vadm cmin smin, || = smin, ⊥ cj ⊥ ≥ cj || ≥ Tinst≤ Tinst≤ Timp,max
[mm] [mm] [kN] [kN] [mm] [mm] [mm] [mm] [Nm] [Nm] [Nm]
Solid calcium silicate block KS NF in accordance with EN 771-2:2015-11
KS 20 - 2.0 - NF - 240 x 115 x 71 mm, stone raw density ρ ≥ 2.0 kg/dm3, stone compressive strength fmean = 26 N/mm2,
minimum wall thickness hmin = 240 mm
5 35 1 0,94 80 80 35 80 6 185
6 35 0,89 0,94 80 80 35 80 11 10 185
6 55 1,4 0,94 80 80 35 80 11 185
8 45 1,17 0,94 80 80 35 80 27 300
8 65 1,23 0,94 80 80 35 80 23 300
10 55 1,06 0,94 80 80 35 80 34 300
10 75 1,29 0,94 80 80 35 80 146 300
Silka XL solid calcium silicate block KS 12DF in accordance with DIN EN 771-2:2015-11
KS- R (P) - 2.0 - 12DF - 498 x 175 x 148 mm, stone raw density ρ ≥ 1.8 kg/dm3, stone compressive strength fmean = 14 N/mm2,
minimum wall thickness hmin = 175 mm
5 35 0,66 0,91 80 80 40 80 6
6 35 0,66 0,91 80 80 40 80 10 10
6 55 1,17 2,37 80 80 40 80 10 185
8 45 1,8 0,91 80 80 40 80 25 300
8 65 1,8 2,14 80 80 40 80 25 300
10 55 1,83 1,69 80 80 40 80 45 300
10 75 1,91 2,44 80 80 40 80 45 300
Hollow calcium silicate block KS L, 3DF in accordance with DIN EN 771-2:2015-11
SWKV KSL 12 - 1.6 - 3DF - 240 x 175 x 113 mm, stone raw density ρ ≥ 1.5 kg/dm3, stone compressive strength fmean = 17 N/mm2, minimum wall thickness hmin = 175 mm
5 35 0,31 0,46 58 80 35 58 6 8 100
6 35 0,31 0,46 58 80 35 58 11 10 100
6 55 0,31 0,46 58 80 35 58 11 100
8 45 0,46 0,46 58 80 35 58 27 200
8 65 0,46 0,46 58 80 35 58 27 200
10 55 0,63 0,63 58 80 35 58 37 200
10 75 0,63 0,63 58 80 35 58 46 200
Masonry brick Mz in accordance with DIN EN 771-1:2015-11
Mz 20 - 2.0 - NF - 240 x 115 x 75 mm, stone raw density ρ ≥ 2.1 kg/dm3, stone compressive strength fmean = 21 N/mm2, minimum wall thickness hmin = 240 mm
5 35 0,46 0,6 80 80 35 80 2 4
6 35 0,46 0,6 80 80 35 80 3 9
6 55 0,46 0,6 80 80 35 80 3 9
8 45 0,66 0,6 80 80 35 80 16 14
8 65 0,66 0,6 80 80 35 80 16 14
10 55 0,86 0,6 80 80 35 80 23 185
10 75 0,91 0,77 80 80 35 80 23 185
Lightweight concrete solid block Vbl in accordance with DIN EN 771-3:2015-11
Vbl 4 - 1.0 - 2DF - 240 x 115 x 113 mm, stone raw density ρ ≥ 1.5 kg/dm3, stone compressive strength fmean = 4 N/mm2, minimum wall thickness hmin = 240 mm
8 65 0,17 0,66 80 80 35 80 6 10
10 75 0,37 0,91 80 80 35 80 5 14

Notes:


For further details on compressive strength, spacing, edge distances and installation positions, please refer to ETA-23/0196
To determine the admissible load, the partial safety factor from ETA γM=2.5 was taken into account on the resistance side and a partial safety factor γF=1.4 on the impact side.
The specified values apply to an individual anchor in masonry with fvko: 0.15 [N/mm²] and σd: 0.2 [N/mm²].
For combinations of tensile and shear loads, bending torques or reduced spacing and edge distances, please see ETA-23/0196.
Documentation for block removal must also be provided.
Performance data in concrete - individual fixing point according to ETA-16/0043
Anchor size [mm] 6 8 10 12 14
Nominal length of thread engagement hnom [mm] 40 55 45 55 65 55 75 85 65 85 100 75 100 115
Admissible centric tension load1) on an individual anchor without the influence of the edge distance Tensile zone
(cracked concrete C20/252),
s ≥ 3 hef c ≥ 1.5 hef) 		Nadm [kN] = C20/252) 1,0 1,9 2,4 4,3 5,7 4,3 8,0 9,6 5,7 9,4 12,3 7,6 12,0 15,1
Compressive zone
(uncracked concrete C20/252),
s ≥ 3 hef c ≥ 1.5 hef) 		1,9 4,3 3,6 5,7 7,6 5,7 9,5 11,9 7,6 13,2 17,2 10,6 16,9 21,2
Permissible shear load1) on an individual anchor without the influence of the edge distance Tensile zone
(cracked concrete C20/252), c ≥ 10 hef) 		Vadm [kN] = C20/252) 3,0 3,3 3,6 4,8 6,4 4,8 15,9 16,2 6,1 18,8 20,0 7,6 24,1 26,7
Compressive zone
(uncracked concrete C20/252), c ≥ 10 hef) 		3,3 3,3 5,0 6,8 8,1 6,8 16,2 16,2 8,5 20,0 20,0 10,6 26,7 26,7
Permissible bending moment Madm [Nm] 4,8 12,4 26,7 53,8 88,1
Admissible load under seismic activity performance categories C1 and C2 see European Technical Assessment ETA-16/0043 C1 x x x x x x x
C2 x x x x
Admissible load when exposed to fire (R30, R60, R90, R120), see European Technical Assessment ETA-16/0043
Performance data in hollow-core prestressed concrete ceilings according to ETA-16/0128
Anchor size [mm] 6
Mirror thickness [mm] ≥ 25 ≥ 30 ≥ 35
Anchors in a redundant non-structural system in hollow-core prestressed concrete ceilings5) Fadm [kN] 0,4 0,8 1,2
1) The partial safety factors of the resistances yM regulated in the evaluation/approval and a partial safety factor of the effects of γF = 1.4 have been taken into account. For a combination of tensile and shear loads, for the influence of the edge distance and anchor groups please see the appropriate guidelines e.g. DIN EN 1992-4.
2) The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths.
3) The permissible loads were determined without axial and edge distance influence.
4) Number of attachment points ≥ 3 and at least one anchor per attachment point produces a load per attachment point of Fadm≤ 1.4 kN or number of attachment points ≥ 4 and at least one anchor per attachment point produces a load per attachment point of Fadm≤ 2.1 kN. The admissible loads can be increased if the design shows that the requirements governing the strength and rigidity of the component to be attached remain satisfied even after the failure of an anchor in terms of the limit state of serviceability and load-bearing capacity.
5) The assembly data must be observed
Performance data in concrete - anchors in a redundant non-structural system according to ETA-16/0128
Anchor size [mm] 5 6
Nominal length of thread engagement hnom [mm] 35 35 55
Anchors in concrete in a non-structural system based on a redundant design3) Nadm [kN] ≥ C20/25 0,6 0,6 3.64)
Permissible shear load1) on an individual anchor without the influence of the edge distance Tensile zone
(cracked concrete C20/252), c ≥ 10 hef) 		Vadm [kN] = C20/252) 2,0 2,0 3,3
Compressive zone
(uncracked concrete C20/252), c ≥ 10 hef) 		2,1 2,8 3,3
Permissible bending moment Madm [Nm] 2,5 4,8
Admissible load when exposed to fire (R30, R60, R90, R120), see European Technical Assessment ETA-16/0128

Product information

Würth Catalogue (1)

Catalogue page as PDF 1

Datasheets (1)

CAD data (available after login)

Certificates/ Documents (0)

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details