Cutting disc Speed for steel
Cutting disc for steel Speed
CUTDISC-SP-BLUE-ST-SR-TH2,0-BR6-D60MM
Register now and access more than 6,000 products
- Faster and more effective due to very short cutting times
- Very thin for precise, almost burr-free and chatter-free cuts
- The very thin design also ensures very clean and cool cutting surfaces
- High protection against breakage
- Very comfortable working that is gentle on the user and power tool with less effort
- ZEBRA quality for particularly high demands
- Store in a dry place, at 20 °C room temperature
- Always wear appropriate protective clothing while working
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure
- Always clamp cutting discs (straight design) with the metal ring towards the power tool
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organisation for the Safety of Abrasives)
Datasheets(X)
- Particularly suitable for steel
- Particularly effective at cutting thin-walled pipes and profiles, thin metal sheets, bodywork panels etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 3 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 3 of 4 points |
Cut quality (point system) | 3 of 4 points |
Diameter x thickness | 60 x 2.0 mm |
Bore hole | 6.0 mm |
Design | Straight |
Max. rotation speed | 25000 rpm |
Max. circumferential speed | 80 m/s |
Material to be processed | Steel |
Last viewed
Powerbond bodywork adhesive
Specially fused alumina sanding tip, pink
Profile rubber adhesive
Bond + Seal structural adhesive
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Metric combination wrench with POWERDRIV® drive
Cable tie KBL 1 made of polyamide with plastic tongue
Screwdriver slotted striking cap with hexagon shank
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Acrylic sealant