Door frame clamp
Door jamb clamp
DRJMBCLMP-TU-(SPNW545-1010)
Register now and access more than 6,000 products
- Eliminates the need for laborious alignment using inserts, wedges or spreaders
- Eliminates distortion even if the internal pressure of the foam is uneven
Datasheets(X)
Two clamps are used per door - one at the level of the lock and the second at the level of the lower hinge. Thanks to the flat clamping plates, the door frame clamp can also be fixed in grooves in the casing. The butterfly screws on the sides can be used to support and align the clamp against the wall. The printed scale simplifies adjusting the clamp to the size of the door casing. Door clamps can be attached to the casing in the workshop. This enables the door casing to be transported safely to the building site.
Min./max. clamping width | 545-1010 mm |
Product weight (per item) | 1420 g |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Cone grease nipple shape A, straight DIN 71412, zinc-plated steel, shape A
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
File handle
O-ring, metric
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Vernier callipers, digital
Interior trim clip type 1
Gas discharge bulb for xenon original drivers (must be fitted ex works)
Electrical insulating tape