EURASEAL U-100 universal window sealing tape for indoor and outdoor use
WNDWSEALTPE-U100-SA-GREY-W70MM-L50M
Art.-no. 0875591070
EAN 4061975596871
Register now and access more than 6,000 products
Variable Sd value
- The membrane's variable Sd value ensures particularly effective drying of the joint
- Verified by the Fraunhofer Institute
- Reduces the risk of building damage caused by moisture and mould in the structure
Extremely wide range of applications
- Can be used for sealing both indoors and outdoors
- Double-sided adhesive means the tape can be bonded on the same or opposite side
- Simplifies material storage as fewer different tape types need to be kept in stock
Excellent installation
- Quality-controlled installation in accordance with the requirements of the German RAL quality assurance association for windows and doors
- Variable Sd value allows a tighter seal to be maintained on the inside than the outside
- Easy to plaster over the rough, fleece-coated side
This product is classified in accordance with EMICODE® (EC1 Plus). EMICODE® is an independent labelling system for low-emission products, based on specified test methods and limit values.
- A 2 to 5 cm excess must be retained in the corner area, depending on the joint width.
- A movement loop must be created.
- Use EPDM sealing tape adhesive for perimeter bonding of floor-level elements with EPDM outdoor sealing tape.
- Combine as follows: Window sealing tape inside and VKP Plus outside.
- Combine as follows: Perfect neutral silicone inside and window sealing tape outside.
- Form the outer seal of the lower connection in the shape of a tray (sloping outwards).
EMICODE EC1plus: Very low emission – the EMICODE classification system characterises the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For sealing window joints and connecting joints on metal façades and conservatories.
Preparation
- Clean any loose dirt from the substrates.
Installation on windows
- Stick the window sealing tape to the back of the blind frame using the self-adhesive strips.
- Press firmly using a press-on roller.
- Install the window.
- Fill with PURLOGIC foam.
Installing on masonry
- Apply a 6 to 8 mm thick continuous bead of flexible tape adhesive or flexible tape adhesive Plus to the reveal.
- Lightly press on the window sealing tape using a press-on roller.
 | |
Colour | Anthracite |
Backing material | Polypropylene fleece |
Material of membrane | Polyethylene copolymer |
Width | 70 mm |
Thickness | 0.35 mm |
Length of roll | 50 m |
Min./max. processing temperature | 5 to 45 °C |
Min./max. temperature resistance | -40 to 80 °C |
Min. resistance against driving rain (pressure)/conditions | 600 Pa / in accordance with DIN EN 1027 |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102, according to test certificate P-NDS04-779 |
Ultraviolet resistance | 3 months, outdoor weathering |
Air layer thickness equivalent to water-vapour diffusion/conditions | 0.5 m / at 90% humidity |
Shelf life from production/conditions | 12 Month / at 20°C |
Last viewed
Lithium button cell 3 V
Hammer drill bit Plus Duo-S Vario
Underbody seal cup gun
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Hexagon bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Repair set for 1/2 inch multi-angle ratchet 4 pieces
Wing-tip drilling screw with countersunk milling head with pias AW recess
Metric combination wrench with POWERDRIV®
Threaded bushing For repairing car spark plugs, TIME-SERT®