High-strength screw retainer - THRLOK-DOS-HSTRTH-50G

High-strength screw retainer - THRLOK-DOS-HSTRTH-50G - 1

High-strength screw retainer - THRLOK-DOS-HSTRTH-50G - 2

High-strength screw retainer - THRLOK-DOS-HSTRTH-50G - 3

High-strength screw retainer

Name: High-strength screw retainer
Brand: Würth
SKU: 0893270050

Threadlocker high strength
THRLOK-DOS-HSTRTH-50G

Art.-no. 0893270050

EAN 4024835812481

All versions

Similar products

Prices for customers after login

High-strength screw retainer

Art.-no. 0893270050

Prices for customers after login

Quantity

x 1 pcs

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 0800116633

Tough removable screw retainer and sealing compound – single-handed dispensing system

High-strength bonding

Can only be removed once heated up to > 250°C

Suitable for screw connections exposed to high stresses

A 100 % seal is achieved - no additional securing parts are necessary

Protects against corrosion due to friction and against rust

Excellent media and thermal stability

Universal products with wide range of applications

Prevents detachment, e.g. through vibration and shock loads

No unwanted locking problems such as with mechanical screw retainers, for example

High resistance

Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list)

Silicone-free, solvent-free and oil-free

DOS system:

Practical one-handed operation thanks to the clever turn lock

One hand always remains free.

Continuously adjustable dispensing system

Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck

Costs optimised thanks to emptying with virtually no remaining product

Notice

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces.

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

For securing, fastening and sealing threaded connections such as bolts, stud bolts, nuts, threaded plugs, thread inserts, ball bearings and roller bearings, which do not normally have to be detached. The high-strength threadlocker is for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, and electrical and electronics construction.

Instructions

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.

For more information, please refer to the technical data sheet.

Chemical basis	Dimethacrylic acid ester
Colour	Green fluorescent
Density/conditions	1.11 g/cm³ / in accordance with DIN EN ISO 2811-1
Min./max. viscosity /conditions	500-900 mPas / at 25°C, Brookfield RVT, spindle 2/20 rpm
Suitable for max. thread	M25
Max. gap-filling ability	0.15 mm
Min./max. initial strength	5-15 min
Min./max. functional strength	1-3 h
Min./max. final strength	3 h-6 h
Min./max. compressive shearing strength /conditions	15-30 N/mm² / in accordance with ISO 10123
Min./max. breakaway torque	30-60 Nm
Breakaway torque conditions	DIN EN 15865
Min./max prevail torque	10-30 Nm
Conditions for prevail torque	DIN EN 15865
Min./max. processing temperature	5 to 35 °C
Min./max. temperature resistance	-55 to 150 °C
Min. flashing point	100 °C
Shelf life from production/conditions	18 Month / at room temperature
Weight of content	50 g
Silicone-free	Yes
Solvent-free	Yes
Fully hardening/curing conditions	Exclusion of oxygen and contact with metal (copper or iron ions)

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.