Interior trim clip with half-round head suitable for oval holes
Interior trim clip with half-round head
INTRMCLIP-MB-PLA
Register now and access more than 6,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
For fastening trims to carrier components.
 | |
Min./max. drill hole diameter | 7.5-7.7 mm |
Min./max. attachment thickness | 0.88-0.88 mm |
Head diameter (A) | 13 mm |
Core diameter (B) | 6 mm |
Width (C) | 18.00 mm |
Length below head (D) | 12.7 mm |
Grip range head (E) | 2.5 mm |
Colour | White |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Universal |
Corresponds to original spare part number | A0039884178 |
Installation location | Bodywork |
Type of vehicle | Universal |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
U-shaped cutting knife
Standard cable connector with metal latch
Cone grease nipple shape A, straight DIN 71412, zinc-plated steel, shape A
WÜPOFAST® zinc-plated blue chipboard screw
7-pin socket 12 V With cut-off contact for rear fog light
Diamond tile dry core bit M14 seat
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
Pipe and fastening clamp Multifix
Plastic rivet opened without pin
Hammer drill bit Plus Duo-S Vario
