Interior trim clip, type 3
Interior trim clip with closed anchor
INTRMCLIP-TOYOTA-WHITE
Register now and access more than 6,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Min./max. drill hole diameter | 9.30-9.40 mm |
Min./max. attachment thickness | 1.00-2.50 mm |
Head diameter (A) | 13.20 mm |
Core diameter (B) | 9.30 mm |
Width (C) | 9.30 mm |
Length below head (D) | 15.70 mm |
Grip range head (E) | 2.00 mm |
Colour | Neutral |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Lexus, Mazda, Toyota |
Corresponds to original spare part number | 992740825, 6777112010 |
Installation location | Bodywork |
Type of vehicle | Passenger car |
Last viewed
Countersunk head/cylinder head screws/hexagon nuts/washers Assortment in system case 4.4.1, 1,200 pieces.
W1 W1 joint bolt clamp
Pipe cutter
O-ring, inch assortment
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Screwdriver, 1/4 inch with bit holder
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hand tap, second tap HSS DIN 352
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Twist drill bits HSS DIN 338 type RN TIN head