Joint seal WÜTOP Flex-Plus
CONSEAL-ALU-(FLEX-PLUS)-BROWN-280MM
Art.-no. 0681018041
EAN 4046778536583
Register now and access more than 6,000 products
Ideal alternative to sheet metal and lead flashing
Material adapts perfectly to roof surface:
The embossed surface structure allows it to be optimally moulded to the roof and easily bent in any direction
No harmful heavy metals such as lead
UV and weather-resistant
Paint-coated surface allows optimum adaptation to the respective tile
Permanently elastic, temperature-resistant butyl adhesive with high adhesive strength on almost all substrates
Rounded edges prevent hand injuries
3D mouldability thanks to surface embossing.
Optimum sealing of junctions (chimneys, skylights, dormers etc.).
Datasheets(X)
Cut WÜTOP Flex-Plus to the required length using scissors. Roughly fit the material to the shape of the roof and pull the masking film off the adhesive coating on the back. Firmly press onto the tiles and smooth down into the trough. WÜTOP Flex-Plus can also be overlapped. Ensure that overlapping sections are adhered and pressed down very carefully, especially in corner areas. We recommend using a rubberised pressure roller for pressing down the product. If WÜTOP Flex-Plus is applied vertically to structural elements (e.g. a chimney), the top edge must be fitted with a standard cover strip and sealed with a permanently elastic sealant.
To ensure good, lasting adhesion, note the following:
- Processing temperature from +5 °C
- The substrate must be clean, dry and free from dust and grease
- Mould WÜTOP Flex-Plus exactly to the contours of the surface and press down firmly
- Conduct your own adhesion tests on tiles with silicone coatings
Colour | Brown |
Length of roll | 5 m |
Roll width | 280 mm |
Length | 10 m |
Number of rolls | 2 PCS |
Min. processing temperature | 5 °C |
Material thickness | 120 µm |
Ultraviolet resistance | Yes |
