LIGHT hazard warning adhesive tape
HAZDWARNADHTPE-BLACK/YELLOW-50MMX33M
Art.-no. 0812449406
EAN 4066443028854
Register now and access more than 6,000 products
Versatile application
- Thanks to its high-visibility warning hatching, LIGHT hazard warning adhesive tape provides a strong warning effect and is ideal for temporary route marking, hazard warning and the identification of potential hazard zones.
- Can be walked on.
- Meets the requirements of ASR A1.3, DIN 4844 or DIN EN ISO 7010.
Soft, matte PVC tape with pressure-sensitive rubber adhesive
- Outstanding resistance to abrasion, corrosion and moisture.
- Good abrasion resistance.
- Excellent moulding to different shapes.
Broad substrate compatibility
- Suitable for smooth concrete screed, EP/PU/MMA coatings and tiles.
- For smooth indoor surfaces.
Easy to use
- Self-adhesive with very good adhesion to smooth surfaces.
- Quick to apply, easy to clean and can be walked on immediately.
- Simple and time-saving to apply.
- Can be torn off by hand.
- Yellow-black tape for permanent hazard points and obstacles.
- Red and white tape for temporarily restricted or movable hazard points and obstacles.
- Pivoting and turning on the tape by industrial trucks or other heavy vehicles should be avoided. This can damage the tape.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
The LIGHT hazard warning adhesive tape is made from soft PVC and is ideal for edges, work areas, passenger car lifts, steps, bundles and markings that change frequently.
It is suitable for indoor use, e.g. in production facilities, manufacturing halls, warehouse halls, sales centres, workshops, sales rooms, sports halls, trade fair halls and all public buildings.
The tape is very simple to apply to smooth concrete screed, EP/PU/MMA coatings or tiles and can be walked on immediately after bonding. It is suitable for temporary or frequently changing markings but not intended for continuous vehicle traffic.
The yellow and black tape is very noticeable, even from a distance. The colour combination supports standards-compliant hazard warning and improves navigation.
The red and white signal colours clearly indicate restricted or dangerous areas, even from a distance.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces - particularly concrete and asphalt, untreated and uncoated wood and all rough and grained surfaces.
The hazard warning adhesive tape must be pressed into place following installation to improve adhesion and durability. A press-on roller is particularly suitable for this purpose.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Adhesive base | Natural rubber |
Length | 33 m |
Width | 50 mm |
Thickness | 0.16 mm |
Min./max. processing temperature | 5 to 40 C |
Min./max. temperature conditions | 0 to 60 C |
Last viewed
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Body repair kit 10Ton
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Flat connector 2.8 uninsulated
Clamps and clips for trims
Welding face shield with flip front lens
Metric combination wrench with POWERDRIV®
Angled gear
3/8 inch SOCKET WRENCH INSERT FOR TX SCREWS, SHORT
1/2 inch impact socket wrench insert hexagon, metric, short