Lock washer S Spring steel, plain
Plain spring steel type S
WSH-LOK-S-10,0X6,4X0,60
Register now and access more than 6,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases—primarily when using short screws and loads which are vertical to the screw axis—to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
 | |
Internal diameter (d1) | 6.4 mm |
Outer diameter (d2) | 10 mm |
Height (h1) | 1.2 mm |
Thickness (s1) | 0.6 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Würth Catalogue (1)
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Retro-reflective tape For solid surfaces type III (retro-reflective)
Washer system hose
Hook and loop fastener support plate For dust-free working and optimum results
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Power side cutters, switchable
Glue roller With polyurethane roller
PH impact bit 5/16 inch
Expanding nut, type 3 Head round, tip pointed
Twist drill bit HSS DIN 338 TYPE RN
