Maintenance oil Multi
Maintenance oil multi
MAINTOIL-MULTI-400ML
Register now and access more than 6,000 products
Lubricates, cleans and maintains
- Lubricates locks, hinges, bushings, chains, door locks
- Stops creaking and squeaking and restores sliding properties of seized and jammed parts
- Cleans and maintains plastic and metal parts such as e.g. panelling and housing
Removes rust and protects against corrosion
- Loosens rusted bolts, pipe fittings, screws, nuts, joints, Bowden cables, shafts, locks etc.
- Infiltrates and displaces moisture around electronics and electrics
- Prevents corrosion on metals and electrical components, cable connections, relays, plugs, couplings etc.
- Prevents freezing up of lock cylinders and closures
Resin, acid and silicone-free
Does not attack rubber, paint or plastics
Datasheets(X)
Versatile multi-purpose spray
Shake the can before use, spray the parts and let it take effect briefly. After using, spray the can upside down until it is empty.
Contents | 0.4 l |
Chemical basis | Mineral oil |
Colour | Light yellow transparent |
Min./max. processing temperature for can | -10 to 40 °C |
Min./max. temperature conditions | -30 to 130 °C |
Shelf life from production | 24 Month |
Min. processing temperature for can | -10 °C |
Type of spray head | Standard spray head |
Max. processing temperature for can | 40 °C |
Min. temperature conditions | -30 °C |
Max. temperature conditions | 130 °C |
Min. flashing point | -80 °C |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
AOX-free | Yes |
White oil-free/mineral oil-free | No |
VOC concentration (CH) | 76.57 g/l |
Kinematic oil basis viscosity | 30 cSt |
Material compatibility | NBR |
Conditions for viscosity of oil basis | at 40°C |
Container | Aerosol can |
Weight of content | 270 g |
Conditions to maintain shelf life from production | at 20°C |
Last viewed
High-performance gas-powered nail gun DIGA® CS-2 POWER
Decorative trim adhesive tape
Thread die HSS DIN EN 22568 for standard metric ISO threads
Brake cleaner
Threaded pin ISO 4027, steel, 45H, plain
Jamo plus 4 CSMP screw for adjustable distance mounting Steel zinc-plated partial thread with underhead thread for adjusting the countersunk head with milling pockets
1/4 inch extension
Cordless sabre saw AFS 12 COMPACT M-CUBE
Plus Quadro-L Vario hammer drill bit
ORSY®BULL series 5 worktop