Movement detection paint
Tamper proof sealant
TAMPPROFSEAL-YELLOW-50ML
Register now and access more than 6,000 products
High temperature resistance up to min. 145°C
Also suitable for outdoor use
High insulation resistance
As a covering for electrically conductive parts
High mechanical strength
But can still be removed
No corrosion
Good resistance to water, limited resistance to oil, petrol and diesel
Solvent and silicone-free
Practical accordion bottle
- Easy handling
- Better residue removal
- No clogging of the tip
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Datasheets(X)
The screw retainer varnish is suitable for visually checking all possible movements between connected adjusted parts, and thus documents quality assurance, manufacturing control and product testing with a lacquer seal and protects against intrusion by third parties. The screw retainer varnish is applied to stud bolts, pressure fittings, nuts and other threaded connections once they have been properly pre-stressed and adjusted.
The product can also be used for masking electrically conductive parts to protect against corrosion and influence by touch.
And for colour-coding tools. For mechanics who often work in other workshops or who work together with several colleagues in a workshop.
The application surface must be clean, dry and free from grease. Apply/drip the paint directly onto the area to be secured.
For more information, please refer to the technical data sheet.
Colour | Colza yellow RAL 1021 |
Contents | 50 ml |
Density/conditions | 0.99 g/cm³ / at 20°C, 50% relative humidity |
Min. initial strength | 30 min |
Min./max. final strength | 12 h-24 h |
Min./max. processing temperature | 5 to 30 °C |
Min./max. temperature resistance | -40 to 145 °C |
Silicone-free | Yes |
Solvent-free | Yes |
Shelf life from production/conditions | 24 Month / cool and dry storage area, in sealed original container |
Last viewed
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hose clamp A4 with asymmetrical lock made entirely of stainless steel
ABS 18 COMPACT M-CUBE cordless drill/driver
Straight plug connector For commercial vehicles
Hexagonal cap nut, high profile DIN 1587, A4 stainless steel, plain
Screwdriver for hexagon drive with flexible shaft
Metric combination wrench with POWERDRIV®
Silicone spray
Lock washer For shafts DIN 6799, phosphated steel
Interior trim clip, type S