Oil stain remover
Oil stain remover
OILSAIREM-1000ML
Register now and access more than 6,000 products
- Highly volatile cleaner for thorough and effective removal of various oil stains with penetrating action
- Biodegradable
(≥ 99 % according to OECD test method 303 A)
- Free from aromatic compounds
- Without surfactants and colourings
Shake the oil stain remover vigorously as the binding material settles at the bottom and needs to be mixed with the liquid before use.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For removing oil stains on concrete, composite stone, clinker brick, screed, natural stone and unvarnished wood. Also suitable for removing grill oil stains.
Shake product vigorously prior to use. The surface to be treated must be dry before application. Dowse the oil stains to be removed with the oil stain remover and leave to dry until a white, dry crust forms (approx. 10-15 minutes, depending on the amount used). The crust can be swept up or vacuumed.
Contents | 1000 ml |
Container | Can |
Smell/fragrance | Neutral |
Colour | Colourless |
Chemical basis | Acetic aether |
Density/conditions | 0.937 g/cm³ / at 20°C |
Min. flashing point | -4 °C |
Density | 0.937 g/cm³ |
Shelf life from production | 24 Month |
AOX-free | Yes |
Bio-degradable/conditions | Yes / OECD conditions |
Last viewed
Flat connector contact MCP 1.5
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Plastic repair system Smilerepair REPLASTeasy
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Twist drill bit HSS DIN 338 TYPE RN
Charger AL 60-12/18-AS-LI
Electronic welding protection
Soft wax
Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204