Paint spray, silk gloss
Paint spray nitro-alkydal quality, satin gloss
PNTSPR-VW110-SATINBLACK-SATINGLO-400ML
Register now and access more than 6,000 products
High-grade nitro-alkydal quality
- Easy to apply
- Very good coverage properties
- Quick-drying
Can be coated with all common primers, filler products and paint types
Quick-drying paint resin
Formula does not contain heavy metals
Drying time at 20°C
- Dust-dry < 10 minutes
- Tack-free < 20 minutes
- Touch dry < 60 minutes
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For paint repair work, protection from corrosion and weathering, and for surface finishing. Surfaces: Wood, metal, fabric, stone, ceramics, glass, paintable plastics, concrete, wicker. Wide range of uses: Commercial vehicles, bodywork, radiators, window construction, steel construction etc.
Shake the can vigorously for approx. 2 minutes before use. The surface must be clean, dry and free from grease. Remove rust and old loose paint; sand and prime. Spraying distance: 20-25 cm. Maintain a flash-off time of approx. 5 minutes between spray coatings.
Contents | 400 ml |
Colour | Satin black VW 110 |
Chemical basis | Nitroalkydale |
Gloss level | Silk gloss |
Max. temperature resistance | 80 °C |
Density | 0.775 g/cm³ |
Density conditions | at 20°C |
Dust-drying time | 10 min |
Min./max. spraying distance | 20-25 cm |
Min. spraying distance | 20 cm |
Max. spraying distance | 25 cm |
Tack-free after | 20 min |
Shelf life from production | 36 Month |
Min. processing temperature for can | 20 °C |
Conditions to maintain shelf life from production | at 15°C to 25°C and max. 60% relative humidity |
Conditions for drying time | at 20°C |
AOX-free | Yes |
Min. flash-off time | 5 min |
Container | Aerosol can |
Design | Round nozzle |
Free from heavy metals | Yes |
CFC (fuel gas) free | Yes |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Multi-socket wrench 1/4 inch Assortment of 33 pieces
Flat drill bit assortment 6 pieces
Wing repair washer In accordance with DIN 522, A2 stainless steel, plain
Blade receptacle Uninsulated
Hexagon nut with fine thread DIN 934, steel I8I, zinc-plated, blue passivated (A2K)
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Pipe and fastening clamp Multifix
Pin terminal conn MATE-N-LOK (M-N-L) 2.1 Uninsulated
Soft wax
Plus Quadro-L Vario hammer drill bit