Pan head tapping screw, type C, PH recess DIN 7981, A2 stainless steel, shape C, with tip
SCR-PANHD-DIN7981-C-H2-A2-4,8X32
Art.-no. 011948 32
EAN 4011231184373
Register now and access more than 6,000 products
- Tapping screws are thread-forming screws. These screws form their own counter thread when screwed into a prefabricated tapping hole
- Reference values for selecting the correct core-hole diameter are included in DIN 7975
- Type C = thread with tip
- Type F = thread without tip
- Type R = thread with rounded tip
Stainless steel tapping screws are softer than case-hardening steel tapping screws. These screws therefore do not form a counter thread in steel sheets. For this reason, they should only be used in soft materials, such as aluminium.
Datasheets(X)
 | |
Material | Stainless steel A2 |
Surface | Plain |
Form | C |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 32 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3.55 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | C |
Last viewed
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
1/4 inch bit holder, magnetic
RW Edition 1/4-Inch Ratchet 8 pieces
Low-strength pipe and thread sealant with PTFE
1/4 INCH BIT ADDAPTER
Screwdriver TX long with round shank
Mixing nozzle for Powerbond bodywork adhesive
PVC insulating hose