PinPuller® electrodes
Pin puller electrode
ELTRD-PINPULLER-3FOLD
PIN PULLER
Register now and access more than 6,000 products
Economical
In contrast to wiggle wire, PinPuller® electrodes can be welded on more than 1000 times Saves money and resources
Quick
PinPuller® electrodes can be welded on twice as fast as wiggle wire: Saves working time
Functional
The pulling block works in a similar way to a bear claw and straightens dents automatically: Professional repairs
Optimum force distribution
The weld-on electrodes are mounted very closely together in the pulling block (10 mm interval): Optimum distribution of tensile forces make it suitable for use on high-strength sheet metal
Effective and residue-free
The welded connection is broken by twisting the electrodes: Simple removal of electrodes without residue
Prior to initial use, the brass coating must be removed from the tips of the electrodes using a file.
Datasheets(X)
To create curves, the outer electrodes are detached from the sheet metal and only the inner electrodes are pulled.
Design | 3-fold |
Suitable for | Creased dents |
Product weight (per item) | 22.500 g |
Last viewed
Washer Inch, zinc-plated steel (A2K)
Pre-charged NiMH battery
1/4 inch cardan joint
Pneumatic Ratchet Screwdriver DRS 1/2‘‘ Plus
Control module
3/4-inch impact socket wrench insert hexagon, metric, short
Cordless Impact Drill Driver BHD 18BL
Digital multimeter True RMS 6000 counts
Rust remover, Rost Off Special
Perfect zinc spray