Plastic multi-purpose ZEBRA Shark<SUP>®</SUP> anchor with collar - DWL-PLA-COLLAR-10X62

Plastic multi-purpose ZEBRA Shark^® anchor with collar

Name: Plastic multi-purpose ZEBRA Shark ® anchor with collar
Brand: Würth
SKU: 090601062

Plastic multi-purpose anchor, Shark, with collar
DWL-PLA-COLLAR-10X62
ZEBRA-SHARK

Art.-no. 090601062

EAN 4024835774871

All versions

Similar products

Prices for customers after login

Plastic multi-purpose ZEBRA Shark^® anchor with collar

Art.-no. 090601062

Prices for customers after login

Quantity

x 100 pcs

Show availability in Würth shop

Exclusively for trade customers

Locate shop
Login/Register
Call customer service: 0800116633

Universal anchor for fixtures in almost all building materials (low load range)

Fully resistant to rotting, weathering and ageing

Thermally stable from -40°C to +100°C

Colour: Mother-of-pearl white

Pre-formed thread means low insertion torque for WÜPOFAST screw

Longitudinal locking edges prevent rotation

A single screw diameter can be used, regardless of the application

Expanding segments knot together or fold out for positive locking in perforated brick/cavity walls

Pre-formed thread in head

Three-way division for anchorage via positive locking or friction locking

Wings act as anti-rotation device in solid or hollow block brick

For mounting, we recommend the ASSY-D plug screw

Drill the hole

Clean the drill hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Can be used with the maximum screw diameter in solid and hollow block brick to ensure good holding power

In gypsum plasterboard panels, pressboard, wood panels etc.

For use with stud screws, hooks, ring bolts, WÜPOFAST screws, ECOFAST screws, wood screws (e.g. ASSY-D)

Anchor diameter	10 mm
Material	PE - Polyethylene
Colour	Oyster white
Required screw diameter	7 mm
Anchor length (l)	62 mm
Nominal drill-bit diameter (d 0)	10 mm
Drill hole depth (t)	70 mm
Embedding depth (h s)	60 mm
Required screw length (l s)	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
Type description	Zebra Shark anchor 10, with collar

Performance data
Anchor diameter [mm]			5	6	7¹⁾	7¹⁾	8	10	12	14
Recommended loads²⁾	Concrete ≥ B25; C20/25	F_rec. [kN]	0,2	0,3	0,3	0,3	0,4	1,0	1,1	1,3
	Solid bricks ≥ Mz12; KS12		0,2	0,3	0,3	0,3	0,35	0,4	0,45	0,45
	Vertically perforated brick ≥ Hlz12³⁾		0,1	0,15	0,15	0,15	0,2	0,25	0,25	0,3
	Hollow sand-lime bricks ≥ KSL12³⁾		0,2	0,2	0,2	0,2	0,4	0,4	0,5	0,6
	Aerated concrete PB2; PP2³⁾		0,04	0,1	0,12	0,12	0,15	0,2	0,2	0,3
	Gypsum plasterboard d = 12.5 mm		0,1	0,1	0,1	0,1	0,1	0,1	0,1	0,1
	Gypsum plasterboard d = 25 mm		0,15	0,15	0,15	0,15	0,15	0,15	0,15	0,15
	Pumice		0,11	0,13	0,15	0,15	0,18	0,23	0,25	0,28
¹⁾ Diameter of 7 mm still without preformed thread. ²⁾ These values apply when using wood screws with the largest screw diameter. ³⁾ The drill hole is to be made with a rotary drill (without impacting or hammering).

Characteristic values
Screw diameter	d_scr [mm]	3,5	4,5	5	5	6	7	8-10	10-12
Screw diameter for board-type building materials	d_{scr 2} [mm]	3	4	4,5	4,5	5,5	7	8	10
Screw length		= anchor length + material thickness to be fastened + screw diameter + any plaster/insulation thickness
Nom. drill dia.	d_drl. [mm]	5,0	6	7	7	8	10	12	14
Drill hole depth	t ≥ [mm]	40	45	45	60	60	70	80	85
Embedment depth	h_S ≥ [mm]	30	35	35	50	50	60	70	75
Hole diameter in component	d_constr ≥ [mm]	5,5	6,5	7,5	7,5	7	10,5	12,5	14,5