Retouching putty epoxi-stick metal
For detailed information, other images and documents, please select individual articles from the following table.
Exclusively for trade customers
Register now and access more than 6,000 products
Variants
Exclusively for trade customers
Register now and access more than 6,000 products
PERFORMANCE DATA
Shelf life at 24°C 24 months minimum
Shore D hardness at full cure (24 hours) 80
Lap shear tensile strength (on steel 1”×1”×1/16”) 6.2 MPa
Compressive strength 55 MPa
Density 2.2 grams/cm3
Shrinkage <1%
Non-volitile 100%
Electrical resistance 30,000 megohms/cm
Dielectric Strength 300 volts/mm
Temperature limits
Continuous -40°C to 121°C
Intermittent -40°C to 149°C
Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters,
halocarbons, aqueous salt solutions and dilute acids
and bases.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products. Steel Epoxy Stick is a hand-mixable, non-rusting, steel-reinforced epoxy putty that quickly repairs or rebuilds anything made of steel. After mixing it forms an industrial strength polymer compound that can be moulded, wrapped around, or used to build up and repair steel components. After 60 minutes it can be sawed, drilled, carved, sanded and painted. Each handy stick contains pre-measured portions of activator and base throughout – no measuring or mixing tools are necessary. Steel Epoxy Stick cures to a dark grey metallic
colour. The consistency (like modelling clay) eliminates drips and runs, moulds easily and facilitates adhesion to the substrate. Suitable for interior or exterior use, it is resistant to water, chemicals and temperature extremes.
Shelf life at 24°C 24 months minimum
Shore D hardness at full cure (24 hours) 80
Lap shear tensile strength (on steel 1”×1”×1/16”) 6.2 MPa
Compressive strength 55 MPa
Density 2.2 grams/cm3
Shrinkage <1%
Non-volitile 100%
Electrical resistance 30,000 megohms/cm
Dielectric Strength 300 volts/mm
Temperature limits
Continuous -40°C to 121°C
Intermittent -40°C to 149°C
Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters,
halocarbons, aqueous salt solutions and dilute acids
and bases.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products. Steel Epoxy Stick is a hand-mixable, non-rusting, steel-reinforced epoxy putty that quickly repairs or rebuilds anything made of steel. After mixing it forms an industrial strength polymer compound that can be moulded, wrapped around, or used to build up and repair steel components. After 60 minutes it can be sawed, drilled, carved, sanded and painted. Each handy stick contains pre-measured portions of activator and base throughout – no measuring or mixing tools are necessary. Steel Epoxy Stick cures to a dark grey metallic
colour. The consistency (like modelling clay) eliminates drips and runs, moulds easily and facilitates adhesion to the substrate. Suitable for interior or exterior use, it is resistant to water, chemicals and temperature extremes.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!