Puller tool
Extractor tool
EXTRTL-SPNW215MM
Register now and access more than 6,000 products
- Cross-beam adjustment via hexagon nuts on pull legs
- Malleable cast iron cross-beam
- Nitrocarburised spindle
- High-strength legs
Datasheets(X)
After separating, the legs of the puller tool are screwed into the separating blade and the cross-beam is mounted. The spindle is screwed against the shaft. The part being extracted is pulled off gently and securely by tightening the spindle against the end of the shaft.
 | |
Min./max. external clamping width (A) | 70-215 mm |
Clamping depth (B) | 250 mm |
Spindle length | 210 mm |
Surface of the spindle | Nitrocarburised |
Material of spindle | Steel |
Material of cross-piece | Malleable cast iron |
Surface of the cross-piece | Zinc plated |
Width across flats | 22 mm |
Thread dimension | G 1/2 inch |
Last viewed
Time-Sert® drill bit
Split pin ISO/WN 1234 steel zinc-plated
Multi-purpose knife with safety function
Circlip pliers, shape A for shaft circlips
Washer with round hole, mainly for wood construction DIN 440, A4 stainless steel, plain
High-performance gas-powered nail gun DIGA® CS-2 POWER
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Spade drill bit For wood
Threaded mandrel with chuck