Quick-action clamping nut Fixtec
Quick action lock nut Fixtec for angle grinder
QCKLOKNUT-FIXTEC-F.ANGLGRIND-UPTO150MM
Register now and access more than 6,000 products
For angle grinders up to max. Ø 150 mm with commercially available M14 spindle thread
If necessary, quick-action nut can also be loosened with face wrench
- Holes are located below the clip
- Use suitable face wrench
Once the clamping flange and separating or roughing wheel are mounted, the free grinding spindle length must be at least 3 mm.
Datasheets(X)
Fold up clip and screw nut on clockwise with grinding spindle locked. Fold clip back in.
 | |
Diameter | 49 mm |
Height | 9 mm |
Last viewed
Abrasive fleece roll VSM KV301
Split pin ISO/WN 1234 steel zinc-plated
Super RTV silicone adhesive and sealing compound
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Soft wax
Flap disc for steel and stainless steel Red Stripe
18 V cordless power tools set with tool bag ABS/ABH/AFS COMPACT M-CUBE
Industrial hand cleaner Economy
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Flat chisel In line with DIN 6453