Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated black (A2S), with H cross recess.
DIN 7983 steel zinc plated black H shape C w. tip
SCR-RSDCS-DIN7983-C-H2-(A2S)-3,9X25
Register now and access more than 6,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = Thread without tip
Shape R = Thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated black |
Form | C |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H2 |
Nominal diameter (d1) | 3.9 mm |
Head diameter (dk) | 7.5 mm |
Length (l1) | 25 mm |
Head height (k1) | 2.3 mm |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
RoHS-compliant | No |
Declaration of performance (EU-CPR) | No |
Last viewed
High-gloss polish P20 Plus
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Metric Stud M10
Diagnostic software, vehicle
Single wire seal (SEAL) For uninsulated cable connector
MFD-S multi-purpose drill bit with straight shank
Hand tap, taper tap HSS DIN 352
PN-impact wrench Standard DSS 1/2 inch H set 5 pcs
Spring lock washer, shape A DIN 137, spring steel, mechanically applied zinc coating, shape A, curved
Metric combination wrench with POWERDRIV®