Resin remover concentrate HEK 5000

Name: Resin remover concentrate HEK 5000
Brand: Würth
SKU: 0893611

Resin remover concentrate, HEK 5000
RSNREM-HEK5000-CANISTER-5LTR

Art.-no. 0893611

EAN 4011231895255

Prices for customers after login

Resin remover concentrate HEK 5000

Art.-no. 0893611

Prices for customers after login

Quantity

x 1 pcs

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 0800116633

For loosening resin coatings and other soiling

Ideally suited for fast cleaning of saw blades for hand-held and stationary circular saws, plane blades, milling heads.

Notice

Painted cast iron surfaces may be dissolved slightly. Use a nylon or plastic paint brush for cleaning, or clean with a brush in an immersion bath. Do not bring into contact with materials containing aluminium. Wipe residues from the treated surface with a cloth.

Contains potassium hydroxide.

Please note: Do not use on aluminium.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

HEK 5000 has been specially developed for cleaning and loosening resin residues on hand-held circular saw blades, circular saw blades for stationary use, plane knives and milling heads.

Instructions

Dilute with water to a ratio of 1:2 before use.

Contents	5 l
Smell/fragrance	Odourless
Colour	Colourless
Chemical basis	Potassium hydroxyde
pH value / conditions	9 / at 20°C
Density/conditions	1.18 g/cm³ / at 20°C
Shelf life from production	36 Month
Bio-degradable	Yes
AOX-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.