SH perforated sleeve for injection systems
Perforated sleeve SH
ANC-(SH)-PLA-TRANSP-20X200
Register now and access more than 6,000 products
Individual fixing point in masonry
- ALLROUNDER WIT-VM 250 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- WIT-NORDIC injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- BASIC WIT-PM 200 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
Do not use perforated sleeve SH in aerated concrete!
- European Technical Assessment ETA-16/0757 and ETA-20/0854: Individual fixing point + masonry in solid and perforated brick (perforated sleeve SH, ALLROUNDER WIT-VM 250 or WIT-NORDIC, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1)
- European Technical Assessment ETA-13/0037: Individual fixing point + masonry in solid and perforated brick (perforated sleeve SH, BASIC WIT-PM 200, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1)
Datasheets(X)
For anchoring in solid and perforated brick masonry
Type description | SH 20 x 200 |
Diameter | 20 mm |
Length | 200 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 20 mm |
Drill hole depth (h 0) | 205 mm |
Effective anchoring depth (h ef) | 200 mm |
Suitable for anchor rod | M12 |
Required injection mortar | WIT-PM 200 |
Approval | ETA-13/0037 |
Last viewed
Twist drill bit HSS DIN 338 TYPE RN
1/2 inch impact socket wrench insert hexagon, metric, short
PN-impact wrench Standard DSS 1/2 inch H set 5 pcs
HSS annular cutter
Jamo plus 4 CSMP screw for adjustable distance mounting Steel zinc-plated partial thread with underhead thread for adjusting the countersunk head with milling pockets
Trim clip
Metric combination wrench with POWERDRIV®
Special parts
Abrasive pad
Butyl car body sealing tape