Screwdriver slotted long With round shank
Screwdriver slotted round blade long
SCRDRIV-SL-0,8X4X300
ZEBRA
Register now and access more than 6,000 products
Long shank, great tip
- For hard-to reach areas and special applications due to the extra long shank
- Robust round shank, which has been brushed chrome-plated to protect against corrosion
- Black point tip for the best possible fit in the screw
- Tip finished according to the DIN 5264-A and ISO 2380 standards for slotted screwdrivers
- Complies with the DIN 5265 standard
Not just any handle
- Fatigue-free working with the 2C handle with hard core and soft, non-slip surface
- Fast-turning zone and hard material in the lower part of the handle enable quick turning using the index finger and thumb once the screw is loosened
- Quick and easy identification with the shank symbol and size printed on the handle
Datasheets(X)
 | |
Tip type | Slot |
Thickness of cutting edge x width of cutting edge | 0.8 x 4 mm |
Blade length (A) | 300 mm |
Handle length (B) | 83 mm |
Handle width (C) | 27 mm |
Last viewed
DUO-S impact drill bit with straight shank
1/4 inch cardan joint
Wedge lock socket housing Deutsch DT series
Sanding sponge
Spiral wire 15-pin 24 V
Grease nipple assortment DIN 71412 A, B, C 600 pieces in system case 4.4.1.
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)
Straight plug connector For commercial vehicles
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip