Self-tapping thread insert with cutting slot
Thread insert with cutting slot steel zinc plated
THRINRT-SLFCUT-(DSP)-M5
Register now and access more than 6,000 products
- For producing high-strength screw connections and other threaded connections in materials with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- The inserts are simply screwed into a pre-drilled or pre-cast hole
- Cutting effect due to sharp edges and interrupted threads of the male thread
- The front threads are bevelled for easier cutting and insertion
- The cutting slot keeps the thread inserts anchored even during strong vibrations or shaking of the workpiece.
- Chrome(VI)-free zinc thick film passivation for good corrosion protection (corrosion resistance in salt spray test according to DIN EN ISO 9227-NSS (h): 72h white rust/120 red rust)
Datasheets(X)
CAD data (available after login)
- Applications in the entire metal and plastic processing industry
- Thread reinforcement on tools with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- For repairing torn-out threads
- Usual applications:
- For light metals and metals with a strength up to approx. 400 N/mm²
- For cast iron with hardness up to approx. 220 HB
- Plastic and fibreglass-reinforced plastic
(Tests on the original component are recommended, particularly near edges.)
 | |
Material | Steel, case-hardened |
Surface | Zinc plated thick-layer passivation |
RoHS-compliant | Yes |
Thread type x nominal diameter (d) | M5 |
Length (L) | 10 mm |
Outer diameter x pitch (D) | 8 x 1 mm |
Min./max. drill hole diameter | 7.2-7.6 mm |
Last viewed
System assortment 8.4.1, circlip pliers 25 pieces
Nylon sanding fleece disc Inner Hole Red Stripe
Mini digital multimeter
Bond and Seal Fast structural adhesive
Hexagon nut, low profile, with clamping piece (non-metal insert), fine thread DIN 985, A2 stainless steel, plain
Tapping and chipping hammer BMH 40-BL
ABS 18 COMPACT M-CUBE cordless drill/driver
Hand tap, taper tap HSS DIN 352
Turn Signal and Brake Light Bulbs S25 24V 21-5W BAY15d
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled