Speed cutting disc For steel
Cutting disc for steel Speed
CUTDISC-SP-BLUE-ST-SR-TH2,0-BR6-D60MM
ZEBRA
Register now and access more than 6,000 products
- Very fast cutting times
- Extremely thin for precise, almost burr- and chatter-free cuts (very clean and cool cutting surfaces)
- Very easy to use and ensures user- and machine-friendly working
- Very good breakage resistance
- Storage: dry, at 20°C ambient temperature
- Work only with appropriate protective clothing
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting - increased risk of breakage!
- Ensure proper contact pressure
- Always clamp cutting discs (straight design) with metal ring towards the machine
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organisation for the Safety of Abrasives)
Datasheets(X)
- Ideally suited to steel
- Particularly effective at cutting thin-walled pipes and profiles, thin metal sheets, bodywork panels etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 3 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 3 of 4 points |
Cut quality (point system) | 3 of 4 points |
Diameter | 60 mm |
Thickness | 2.0 mm |
Drill hole | 6.0 mm |
Design | Straight |
Max. rotation speed | 25000 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Steel zinc plated yellow partial thread cs head Z
MFD-S multi-purpose drill bit with straight shank
Cordless hammer drill ABH 18 COMPACT M-CUBE
3/8 inch extension
Specially fused alumina sanding tip, pink
Tap wrench DIN 1814 Performance, adjustable
Thread cutter for TIME-SERT® Made of HSS
Charger AL 60-12/18-AS-LI
Masking crepe tape 80°C temperature resistance