Stainless steel care spray

Name: Stainless steel care spray
Brand: Würth
SKU: 0893121

Stainless steel care spray
SSTCARE-SPR-400ML

Art.-no. 0893121

EAN 4011231892704

All versions

Prices for customers after login

Stainless steel care spray

Art.-no. 0893121

Prices for customers after login

Quantity

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 0800116633

Cleaning care emulsion for metallic surfaces

Nurturing, creamy emulsion with cleaning effect

Dirt, cleaning and wiping marks and greasy, oily finger prints are thoroughly removed

Can be used on vertical surfaces

Notice

Do not spray on hot surfaces or use in direct sunlight.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Cleaning care emulsion for metallic surfaces

Instructions

First remove coarse dirt with stainless steel power cleaner. Spray onto the dry surface; polish with a soft cloth and wipe off thoroughly.

Chemical basis	Medic white oil with synthetic oils
Smell/fragrance	Characteristic
Colour	White
pH value	10.2
Density	0.855 g/cm³
Bio-degradable	Yes
AOX-free	Yes
Silicone-free	Yes
Shelf life from production	24 Month
Contents	400 ml

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.