Tap wrench DIN 1814 Performance, adjustable
TAPWRNCH-DIN1814-PERFORMANCE-SZ3-(M5-20)
Art.-no. 0657800300
EAN 4061975320780
Register now and access more than 6,000 products
Pinpoint accuracy
- Precision-eroded, hardened clamping jaws with built-in guide groove.
- As a result of the eroding process, only minimal radii are created at the internal and external corners.
- The movable jaws are secured to the handle by a split pin.
- Thanks to this innovative type of fastening, a loosening of the thread screw connections is prevented.
Convenient operation
- Handles with a fine cross knurling ensure safe work even under a high degree of contamination.
- When used in confined spaces, a handle can be unscrewed easily.
Safe work even using high forces
- Offers very high load-bearing capacity compared to standard models.
- Black coated handles made of steel and powder-coated tap wrench body make for a high level of resistance.
Datasheets(X)
Adjustable tap wrench for mounting hand tools with a square shank in accordance with DIN 10, such as hand taps, reamers or screw extractors.
When clamping hand taps, please note the following:
- Turn the handle to release the movable jaw.
- Place the square shank of the hand tap in the resulting gap.
- Turn the handle again to secure the hand tap between the clamping jaws.
- When clamped in this way, the tool is suitable for cutting threads by hand.
- First drill a tapping hole into the workpiece.
- Apply suitable cutting fluid and lubricant to the hand tap.
- Place the hand tap perpendicular to the workpiece.
- Use the 2 handles to apply a high level of force when cutting threads.
- When cutting threads manually, it is important to ensure that the drill bit is turned back at regular intervals, in order to break the swarf created.
Size | 3 |
Length | 380 mm |
Material | Die-cast zinc |
DIN | 1814 |
Min./max. thread-cutting area, metric | 5-20 mm |
Suitable for min./max. square socket size | 4.9-12 mm |
Min./max. thread-cutting area Whitworth pipe thread BSP (G-thread), imperial | 1/8-1/2 in |
Min./Max. thread-cutting area Whitworth (W-thread), imperial | 7/32-3/4 in |
Min./max. reamer cutting range | 6.5-15 mm |
Last viewed
CO2 test liquid for use with CO2 leakage tester
1/2 inch torque wrench with push-through ratchet
Universal holder E 6.3 (1/4") with quick-change chuck
Screwdriver TX long with round shank
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
WÜRTH MODYF Hercules S3 safety boot
HSS annular cutter
1-inch impact socket wrench insert hexagon, metric, short
1-inch impact socket wrench insert hexagon, metric, short
1-inch impact socket wrench insert hexagon, metric, short