Tar remover

Name: Tar remover
Brand: Würth
SKU: 089026

Remover of tar
TARREM-300ML

Art.-no. 089026

EAN 4011231890458

All versions

Prices for customers after login

Tar remover

Art.-no. 089026

Prices for customers after login

Quantity

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 0800116633

Effortlessly removes tar, oil, and splashes of underbody seal and cavity sealant from paint and chrome

Strong solvent for removing stubborn dirt

Easy rinsing thanks to emulsifying effect

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Tar remover has good cleaning properties thanks to its optimised composition of solvents and is used to remove the substances mentioned above and other impurities from vehicles and machines of all types.

Instructions

Spray on directly or apply to the surface to be treated with a saturated cloth, allow to take effect briefly and remove with a cloth or soft sponge.

Contents	300 ml
Product weight (per item)	302.333 g
Container	Can
Chemical basis	Aliphatic hydrocarbon
Smell/fragrance	Characteristic
Colour	Colourless
Min. flashing point	21 °C
Density/conditions	0.749 g/cm³ / at 20°C
Shelf life from production/conditions	36 Month / at 20°C
AOX-free	Yes
Bio-degradable	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.