Welding spray Plus
Welding spray Plus
WELDSPR-PLUS-CANISTER-5LTR
Register now and access more than 6,000 products
Prevents burning-on of weld splatter on stainless steel, steel and other metals and on welding torch tips
Contributes towards optimum welding work. Starting points for corrosion are prevented
Cooling effect
Discolouration is reduced when welding stainless steel
Silicone-free
Subsequent treatments such as painting are not adversely affected
Contents are identical to natural substances
- Free of hydrocarbons and other solvents
- The thin film simultaneously acts as temporary corrosion protection
Weld spray residues are easy to remove
Zinc-plating and painting are then easily possible
Release agents must always be applied sparingly. This is necessary to prevent pores from forming in the weld material and hydrogen-induced cracking from forming in delicate steel and under critical stresses. Prior to zinc-plating, welding spray residues on the workpieces must be thoroughly removed using an assembly power cleaner or a high-pressure cleaner.
This information is only a recommendation based on our experience. Preliminary testing required.
Datasheets(X)
- Welding of stainless steel, steel and other metals
- Protection of welding tips and welding accessories
- Vehicle construction, special construction, steel construction, container and boiler construction, crane construction, automotive and supplier industry and other metalworking industry
- For laser cutting: Prevents slag formation where the laser penetrates the material. Traces of powder on the inside can be removed more easily. The cut edges are clean and no additional finishing is required
Contents | 5 l |
Colour | Colourless |
Container | Canister |
Chemical basis | Water tenside |
Density | 1 g/cm³ |
Shelf life from production | 12 Month |
Density conditions | at 20°C |
pH value | 8.6 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Twist drill bits HSS DIN 338 type RN TIN head
1/4 inch extension
Twist drill bit HSCo DIN 338 type RN oxide
Protective glove E-100
Forstner bit plus
Injector-Ex injector solvent
W1 W1 joint bolt clamp
Brush belt, coarse
1/4" multi-socket wrench insert bi-hex, multi profile
Flat blunt-ended file DIN 7261, shape A