Wire cable spray

Name: Wire cable spray
Brand: Würth
SKU: 08931058

Wire cable spray
WRECBLLUB-SPR-500ML

Art.-no. 08931058

EAN 4038898075967

All versions

Prices for customers after login

Wire cable spray

Art.-no. 08931058

Prices for customers after login

Quantity

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 0800116633

Protective wax with OMC₂ for lubricating and preserving

Does not drip as heat increases

Ideal for areas exposed to direct sunlight

Optimal creep properties

Good penetration of lubricating wax in very tight spaces

Lubricates hard-to-reach areas

Outstanding resistance to water

Ideally suited for outdoor use

Protects against moisture and water

Excellent corrosion protection

Contains additives with OMC ₂ technology

Improved lubricating film

Longer-lasting rust protection

Low wear

Longer service life

Silicone, resin and AOX-free

Free from solid lubricants

Compatible with Viton and nitrile butadiene rubber elastomers

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

High-quality protective wax with OMC 2 technology, for lubrication and preservation

Instructions

Thoroughly pre-clean the parts with a brake cleaner. Spray evenly. Repeated application provides a thick protective film.

Chemical basis	Synthetic wax oxidant
Colour	Brown
Smell/fragrance	Characteristic
Density	0.775 g/cm³
Density conditions	at 20°C
Min. temperature conditions	-40 °C
Max. temperature conditions	120 °C
Corrosion protection period/category	No rust spots after 7 cycles
Corrosion protection period conditions	in accordance with DIN 51802
Behaviour in the presence of water	0-90
Conditions for behaviour in the presence of water	in accordance with DIN 51807-1
Resin-free	Yes
Silicone-free	Yes
AOX-free	Yes
Contents	500 ml
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.