Wire cup brush with support ring, knotted steel with M14 connecting thread
Braided wire cup brush steel with support ring
CPBRSH-AG-KNOTTED-STEEL-D100MMXM14
Register now and access more than 6,000 products
- Efficient machining of large surfaces with aggressive brushing effect and high wear resistance thanks to clockwise knotting on the wire cup brush
- For direct use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Caution: Use angle grinders with a minimum diameter of 180 mm or greater
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Removing slag, rust, scale, concrete residue
- Cleaning welded seams
- Removing varnish and paint
- Preparing metal surfaces before varnishing
 | |
Diameter (D) | 100 mm |
Usable length of wire (H) | 23 mm |
Tool holding device (d) | M14 |
Wire diameter | 0.50 mm |
Material of wire | Steel |
Design | Braided |
Aggressiveness | Middle |
Suitable for angle grinder (point system) | 4 of 4 points |
Max. rotation speed | 9000 rpm |
EN standard | 1083-2 |
Last viewed
Angle grinder protective panel on both sides WSH 230
Rubber Grease Sachets
3/4-inch impact socket wrench insert hexagon, metric, short
Heavy-duty side cutters DIN ISO 5749
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Exhaust slotted nut, reduced wrench size DIN 14441 heavily copper-plated steel
Twist drill bits HSS DIN 338 type RN TIN head
Qck-actn plug cnnctn, PN main pipe
TIME-SERT® threaded bushing
Silicone fluid silicone spray