pias^® drilling screw, hexagon head with long drill tip

Name: pias ® drilling screw, hexagon head with long drill tip
Brand: Würth
SKU: 021405538

pias steel zinc-plated with long drill tip
SCR-DBITL-WS8-(A3K)-5,5X38
ZEBRA PIAS

Art.-no. 021405538

EAN 4065233138841

All versions

Specification

Steel case-hardened, galvanized blue passivated, with long drill tip. For attaching steel profiles to steel undercostrution ≤ 12 mm

Reduction of the assembly time by the drill tip by min. 50%:

Drilling without graining

Thread moulding

Securing

all in one operation

Suitable for component combinations t I / t II according to approval ETA-10/0184

Steel / steel

And additionally for the fixing of latches on steel substructures (bolt connections)

Notice

Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)

The use of impact screwdrivers is not permitted

Drilling screws must be attached perpendicular to the surface of the component

Galvanized drilling screws may only be used where dampness is not to be expected. For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.

Technical information


Standards	CS
Material	Steel
Surface	Zinc plated
RoHS-compliant	Yes
Head type	Hexagon head
Drive type	Hexagon
Thread type	UNC
Shape of tip	Drilling tip
Underground	Steel, Aluminum
Nominal diameter (d₁)	5.5 mm
Length (l₁)	38 mm
Head diameter (d_k)	10.9 mm
Head height (k₁)	5.15 mm
Drill tip length (l_p)	14.0 mm
Screw-thread length with drill tip	35.0 mm
External drive (s₁)	WS8
Max. material thickness to be drilled through (metal)	13.5 mm
For max. substructure thickness	12.0 mm
Min. recommended substructure thickness	2 mm
Min./max. attachment thickness	2.0-21.0 mm
Approval	ETA-10/0184
Min./max. recommended installation speed (idling)	1200-1800 rpm