Corrosion protection spray - CORRPROT-SPR-300ML

Corrosion protection spray

Name: Corrosion protection spray
Brand: Würth
SKU: 089315

Corrosion protection spray
CORRPROT-SPR-300ML

Art.-no. 089315

EAN 4011231893473

All versions

Prices for customers after login

Corrosion protection spray

Art.-no. 089315

Prices for customers after login

Quantity

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 0800116633

Creep capacity, colourless special fluid

Low-viscosity special oil with excellent creep properties

Also protects hard-to-reach areas

Stops corrosion from progressing

Versatile applications – Very good material compatibility on various surfaces, e.g. painted surfaces, metals and plastics.

Self-closing protective film that does not become touch-dry

Scratches, stone chips etc. are automatically sealed again

No areas for liquids to attack

Save time and money in use

Excellent salt water resistance in accordance with ASTM B117

Optimum protection, even under the toughest conditions

Notice

This information is only a recommendation based on our experience. Check material compatibility on an invisible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For preserving tools or machine and vehicle attachments, e.g. snow chains or roof racks. Can be used in hard-to-reach places in the engine compartment and on bodywork seams and wheel wells. Optimum protection for motorcycles and bicycles, particularly when put into storage for the winter. Ideally suited for all surfaces on parts and fittings exposed to high levels of salinity, e.g. near the coast or at sea. Boat engines and attachments are optimally preserved.

Instructions

Clean and dry the surfaces to be treated. Then apply a thin coating of corrosion protection spray. For optimum protection, repeat application every 6 months.

Contents	300 ml
Colour	Transparent
Corrosion protection period	6 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.